Gear Type
- Large/Giant Wire Drawing Machine
-
Intermediate/Fine Wire Drawing Machine
- Split Motor
- Tower Pulley Type
- Copper Wire Drawing Machine
- Copper-clad Aluminum Wire Drawing Machine
- Brass Wire Drawing Machine
- Stainless Steel Drawing Machine
- Titanium Alloy Wire Drawing Machine
- Low Carbon Steel Wire Drawing Machine
- Nickel Alloy Wire Drawing Machine
- Silver Wire Drawing Machine
- Gold Wire Drawing Machine
- Wire Drawing Machine with Annealer
- Flat Wire Drawing Machine
- Wire Stranding Machine
- Wire Take-Up&Pay-Off Machine
- Wire Drawing Machine Auxiliary Equipment
- Extruder Machine
0102030405
MODEL: LHD-450/13D-AL ROD BREAD DOWN WIRE DRAWING MACHINE
This machine adopts new technology, main body integral cast iron box, high-precision grinding gear and NSK bearing, which effectively improves the machine running precision and service life. Single row drum arrangement, quick die change, oil-immersed wire lubrication, guarantee wire the quality of the single -spool take up device, the reaction speed is fast, no pollution, stable operation and has high productivity. This machine is suitable for 500/630 bobbin, which meets the needs of various requirements in industry.
Scope of production: Suitable for rolling and drawing copper flat wire with rounded corners, width to thickness ratio ≤ 5.
| Main technical parameters | |
| Max Inlet | Φ9.5 mm |
| Outlet | Φ1.5-Φ4.5mm(AL), Φ2.0-Φ4.5mm(AL alloy) |
| Diameter of capstan | 450 mm |
| 4Max.number of dies | 13 |
| Reduction ratio | 1.238-1.20 (The last one is adjustable) |
| Elongation | 8%-46% |
| Max speed | 25 m/s |
| Main drawing motor | 355 KW (AC) Motor supply by customer |
| Final capstan motor | 75KW (AC) Motor supply by customer |
| Take up bobbin | PND500 / PND630 mm |
| Pitch of traversing | 6.5 mm |
| Max.OD of payoff coil | 2000 mm |
| Single spooler motor | 22KW AC Motor supply by customer |
| Bobbin capacity | MAX.180KGS |
| Main power | 500 KVA |
| Equipment composition | |
| Single arm payoff | 1set |
| LHD450/13D-AL Main drawing machine | 1set |
| Storage wire tension dancer | 1set |
| φ500/φ630 single spooler | 1set |
| Cooling & filter system for drawing emulsion | 1set |
| Cooling device for gearbox | 1set |
| Electrical control system and operating desk | 0 set (supply by customer) |
| Pointing & Threading machine | 1set |
Components and usage of the unit
Type：Cantilever, double-station line can be used to achieve non-stop joints;
Height of payoff stand4800 mm, OD of pulley on payoff φ420mm；
The pay-off stand is mainly composed of a column, a swing arm and a steering roller；
Elevator and climbing platform on the pay-off rack for easy threading;
It has a stuck automatic alarm stop function. When stuck appears, the pressure arm will automatically lift up, hit the travel switch and make the whole machine stop.
The E-stop button is installed on the pay-off stand column. When an emergency occurs, press this button to stop the machine.
LHD-450/13D-AL WIRE DRAWING MACHINE
Machine structural characteristics
LHD-450/13D-AL wire drawing machine is sliding type, equal-diameter cable drum, 13-die aluminum wire drawing equipment. The machine consists of drawing oil tank, gear box, transmission lubrication system, rotary mold base and main drive motor and traction drive motor. The main drawing machine and final capstan have independent motor drive, which can achieve rapid die change (changing the outlet size, only to replace the last die or reduce the number of dies, electrical control system automatically control, which facilitates the wearing of the dies and the replacement of the wire gauge, and greatly reduces the number of spare wire dies).
The main drawing machine frame is an integral casting structure, and the material of the helical gear in the box is 20CrMnTi, which is treated by carburizing and quenching, and the tooth surface is a hard tooth surface; in order to prevent the die from coming out of the die holder due to the tensile stress during the emergency stop, the input shaft A one-way overrunning clutch is designed inside the pulley to avoid disconnection when driving again. The front of the box is equipped with a fixed speed wheel and a splitter wheel. The bottom of the box is a transmission oil tank with an effective volume of 0.37m3。
All the drawing capstan shafts of the machine, the final capstan shaft and the die holder form a special inclination angle with the host axis. In this way, the squeezing and scratching between the wires wound on the drum during the wire drawing can be reduced or avoided.
The drawing capstan, final capstan and splitter wheel are all inlaid with steel structure, and the surface is sprayed with tungsten carbide. Used on both sides, when the surface is worn, just replace the capstan ring. Wire drawing capstan steel ring, 45# steel, surface spray tungsten carbide; V-shaped design, double-sided use, when the wheel face wear, only need to replace the capstan ring.
The 13th die holder is designed as a rotating structure. When the machine is working normally, it rotates at a constant speed of 31r/min, which ensures uniform wear of the mold and ensures the uniform geometry of the finished wire. A disconnection parking switch is arranged at the exit of the rotary die, and when the accidental disconnection occurs, the machine can be automatically stopped.
The cover of gearbox is sealed with a double lid. The door cover is made of stainless steel, the outer cover is six pieces, and the inner cover is four pieces.
This machine is equipped with a separate transmission lubrication circulation system, and each transmission gear and bearing are spray-type lubrication.
The motor drives the pulley through the triangle belt; As below photo showing: Motor supply by customer
Storage wire tension dancer
Specifications
Maximum Storage line length:14m
Maximum tension: 250N
Diameter of pulley: ￠360㎜ (material is 7075)
The device is mainly composed of two storage reels, guide wheels and cylinders. The fixed wheel is at the bottom, the moving wheel is at the top, and the fixed wheel and the moving wheel are both segmented. The moving wheel is equipped with a linear moving bearing, which reduces the jitter of the incoming and outgoing wires.
On the guide rail sliding the moving storage reel, two stroke switches are provided to prevent the moving reel from colliding with other mechanisms when the tension is too large, too small or broken.
Tension control: The tension is adjusted by air pressure and is constant and consistent.
A metering proximity switch is arranged at the fixed side wire wheel. When the guide wheel rotates, the signal is input into the PLC, and the meter is accurate and the error is small.
With automatic disconnection function
φ500/φ630 Pneumatic single spooler
| 1 | Suitable dia. | φ1.2-φ4.0mm |
| 2 | Max.take up speed | Synchronized with drawing speed |
| 3 | Take up motor | Motor supply by customer |
| 4 | Traversing motor | Stepper motor, traversing pitch adjustable |
| 5 | Traversing width | electrically adjust |
| 6 | Spooler | φ500/φ630 |
| 7 | Brake | Pneumatic brake |
| 8 | Pressure | ≥0.4Mpa |
Pointer
| Roller diameter | Φ110mm |
| Inlet diameter | Φ1.8-9.5mm |
| Diameter of capstan | Φ430mm |
| Speed of capstan | 16r/min |
| Motor power | 4kw |
Electrical control system supply by customer
The system adopts three-phase five-wire system; the power supply voltage is 415V, 50HZ. Or according to the customer request.
PLC control operation, industrial-level man-machine interface operation, and can display working status and fault status; supply by customer
Electrical control cabinet
Inline sliding drawing control cabinet and power cabinet; supply by customer
Inline sliding main drawing console (HMI control); supply by customer
Single bobbin continuous take-up machine control cabinet. supply by customer
Cooling device for gearbox
1200*1200*1200mm water tank+C05-43B0 3.75KW pump+4㎡ Heat exchanger
Cooling & filter system for drawing emulsion
Lubricant supply system： 6.5m³ water tank+ Screw pump+ tube cooler+ Double bucket mesh filter
Spare parts list
[Spare parts] Φ450 drum rings_2 pcs, Tension potentiometer_2 pcs, proximity switch_2 pcs, guide wheel_2 pcs, Traversing wheel_2pcs
Configuration
Main AC motors are adopt Innomotics brand. (previous Siemens). Motor supply by customer
PLC（S7-1200), Driver(G120), HMI (KTP1200) adopts SIEMENS series Driver supply by customer
Bearing: NSK，Japan
＜63A Low voltage electrical components: SIEMENS supply by customer
＞63A Low voltage electrical components: Chint,Top brand in China supply by customer
User requirements
User-supplied compressed air source and external pipeline, cable, heat exchanger, cooling water Source, water pump and pipeline, external connection of various types of connecting wires.
Total installed capacity: 500KVA
Total cooling water: 30M3/h (water temperature 25 degrees)
Compressed air pressure: P≥0.4Mpa
Testing dies: user-provided
Main feature
The frame of the main body is a one-piece casting. The equipment has beautiful appearance, advanced structure, low running noise, high production efficiency and high economic efficiency.
The drawing capstan diameter is Φ450mm, and adopts a series of inclined arrangement to avoid abrasion and squeezing of the aluminum wire. The machine has high strength and good rigidity. The final capstan and the drawing capstan are driven by different motors, and the speed is synchronously adjustable, enabling rapid die change.
The drawing capstan is fully immersed for cooling, and the wire drawing die and aluminum wire are optimally cooled and lubricated.
Space is separated between the capstan cooling lubricant tank and the gear box. In order to prevent the drawing liquid and the gear box oil from interpenetrating and mixing, multiple seals are designed and assembled to prevent penetration.
Drawing capstan, final capstan and guide wheel are specially treated, with high hardness, good wear resistance and long service life.
High-precision grinding gear transmission (gear material is treated by carburizing and quenching with 20CrMnTi), with Low oil level protection.
Others
Machine color: according to customer requirement
Provided by the supplier
Electrical schematic, wiring diagram
Technical manual
Equipment operation direction: Decide by customer
description2