- Large/Giant Wire Drawing Machine
-
Intermediate/Fine Wire Drawing Machine
- Split Motor
- Tower Pulley Type
- Copper Wire Drawing Machine
- Copper-clad Aluminum Wire Drawing Machine
- Brass Wire Drawing Machine
- Stainless Steel Drawing Machine
- Titanium Alloy Wire Drawing Machine
- Low Carbon Steel Wire Drawing Machine
- Nickel Alloy Wire Drawing Machine
- Silver Wire Drawing Machine
- Gold Wire Drawing Machine
- Wire Drawing Machine with Annealer
- Flat Wire Drawing Machine
- Wire Stranding Machine
- Wire Take-Up&Pay-Off Machine
- Wire Drawing Machine Auxiliary Equipment
- Extruder Machine
China Rolling Machine for Die Insertion - Reliable Suppliers & Factory Quality
Product Description
Operating Instructions
1. Structure & Housing
The machine body is a precision-cast structure with a gear reduction mechanism installed within. The upper portion of the housing houses the roller assembly and the drawing drum for die insertion.
2. Mechanism Setup
The rolling mechanism, consisting of upper and lower rollers, is mounted on the upper portion of the machine. The die insertion mechanism is mounted on the rocker arm bracket on the left side of the machine body, while the clamping mechanism and drawing drum are installed directly in front of the machine. The electrical control system is configured when the machine is shipped and must be safe and reliable.
3. Roller Groove Operation
The roller grooves are arranged from deep to shallow below the axis. To operate, first turn the handle counterclockwise and push the wire to be rolled into the corresponding grooves, from large to small. Each rotation of the rollers removes the wire. Repeat this process several times to achieve the desired tip.
4. Drive & Clutch Control
The point-pointing machine is driven by a separate electric motor, which drives the output shaft on the main shaft through two pairs of reduction gears. After disengaging the drum clutch, thread the pointed wire into the drawing die on the rocker arm bracket. Clamp the wire end with a clamp and turn the handle clockwise to rotate the drum. When the desired length is reached, disengage the tapered friction clutch and stop the drum.
Product Parameters
| Name | Unit | Data |
|---|---|---|
| Roller Diameter | mm | 96 |
| Roller Groove Number | pcs | 11 |
| Rolling Range | mm | 1.4-9.5 |
| Drum Diameter | mm | 320 |
| Motor Model | - | Y100L-6 |
| Motor Power | kW | 3 |
| Roller Speed | R/min | 40 |
| Transmission Method | - | Worm gear, worm |
| Weight | Kg | 650 |
Frequently Asked Questions
What is the basic structure of the point-pointing machine?
The machine features a precision-cast body with an integrated gear reduction mechanism. The upper housing contains the roller assembly and the drawing drum for die insertion.
How is the rolling mechanism configured?
The upper and lower rollers are mounted on top of the machine. The die insertion mechanism is on the left rocker arm bracket, and the clamping mechanism and drawing drum are positioned in front.
How should the roller grooves be operated to point the wire?
Turn the handle counterclockwise and push the wire into the grooves from largest to smallest. Repeat this process several times to achieve the desired wire tip.
What type of motor drives this machine?
The machine is driven by a Y100L-6 model motor with a power capacity of 3 kW, which operates through two pairs of reduction gears.
What is the rolling range and roller speed of the machine?
The machine supports a rolling range of 1.4-9.5 mm and operates at a roller speed of 40 R/min.